How to change the oil filter for Toyota Camry

In daily car maintenance, changing the oil, replacing the oil filter and replacing the air filter are three common items. Unlike the other two items, when replacing the oil filter, you need to enter the bottom of the vehicle for replacement. How to change the oil filter? Below for Toyota Camry, let's talk about the steps to replace the oil filter.

First of all, the car needs to be put on the shelves, padded or the operator came to the bottom of the car so that it is convenient to operate.

Then pay attention to remove all the old oil before removing the oil filter, otherwise, the oil will be sprinkled along the interface of the oil filter. As shown in the figure below, first remove the oil drain screw and let off all the old oil.

After all the oil is drained, then remove the oil filter. The oil filter is located at the back of the oil drain screw, as shown below.

The general oil filter is installed in a rotary installation, as shown below, it can be easily removed. Rotate directly and screw it down. If you can't screw it, you can use the tool.

The appearance of the oil filter after removal is as shown below. It is ok to install the new oil filter directly.